Defender® Narrow Stainless Steel Bird Spikes - Key Info
Which birds are they suitable for?
The Defender® Narrow Stainless Steel bird spike is designed for pigeons. It can be used in areas where a pigeon is perching or roosting. However, if it is an overnight nesting or roosting area, a wider spike with more pins may be more appropriate.
Where can I use narrow bird spike?
The Defender® Narrow Steel Bird Prevention Spikes are perfect for the top of fences, small ledges, window sills and walls with depth of up to 7.5 cm (3 inches). They will stop pigeons landing, nesting and roosting as soon as they are installed. If the ledge or roosting site is more than 7.5 cm you may want to consider using and additional row of narrow spikes or a wider spike like the Defender® 8 Wide Steel Bird Spikes which is able to protect a ledge of up to 15 cm (6 inches).
How do bird spikes work?
All Defender® Bird Prevention Spike products have been approved by the RSPB as the most humane way of preventing birds from being able to land without injury or harm. The stainless steel pins stop the birds from being able to land, roost or nest. As the spikes make it uncomfortable for birds, they simply move on safely to a new nesting site.
FREE Guide with all orders and telephone support
We are always happy to help with any questions you may have before or after your purchase – call us on 01626 835055. Don’t forget you will also get a handy 40-Page Bird Control Guide with every order – this has a detailed install guide, health and safety tips, and lots of information to help you solve your pigeon problem for good.
Please note:
For every 24 strips (or part thereof) that you order, we will automatically add one tube of Defender® Fixing Adhesive to your basket. Only our adhesive is recommended as others may not stick to the base. This can be removed at the checkout if not required.
How to install Defender Narrow Stainless Steel Bird Spikes
Anyone can install Defender® Narrow Steel Bird Prevention Spikes. You do not need to hire specialist contractors if you have basic DIY skills. Defender® Bird Spikes are easy and quick to install on your home or business. The preferred method by most customers is to glue the spikes down using our Defender® Bird Spike Fixing Silicone. This is the quickest way to install the bird prevention spikes but if you prefer you can also use nails, screws, or cable ties.
Step 1 - Clean the Area: Make sure the area is clean, dry, and has no loose dirt or debris. For surfaces that are heavily soiled with bird droppings please see our
"How to safely clean bird droppings guide" for more in-depth details.
Step 2 - Fixing Methods: When installing Defender® Narrow Steel Spikes, we would always recommend using Defender® Bird Spike Fixing Silicone. It is quick and easy to use and will attach the strips with ease to most surfaces. However, the prevention spikes are lightweight enough to fix to pipes, railings, and rafters using cable ties, or they can be screwed or nailed to the surface using the small holes already in the base.
Step 3 - Silicone: Using a caulking gun (not provided) squeeze a bead of silicone about 8 mm wide along the base of the narrow steel spike. If the surface you are installing on is uneven you may need to use slightly more. It is important to check the suitability of surfaces for use with Defender® Silicone. For more information, please visit the product page
Defender® Bird Spike Fixing Silicone.
If you do not have a caulking gun we have them available to purchase
here and we also have a handy guide on
"How to use a Caulking Gun" if you haven't used one before.
Step 4 - Positioning: Push the narrow steel bird spike down firmly into place. Along the base of the Defender® Stainless Steel Narrow Bird Spike, there are 9 cross-shaped holes. When using fixing silicone, the adhesive will protrude through the holes and form cross-shaped rivets that lock the stainless steel bird prevention spike firmly in place. The plastic base of the narrow steel spike is flexible and can be installed on a curved surface.
Step 5 - Full Protection: Repeat the process until the area is fully protected. Every effort should be made to spike all possible landing sites 2.5 cm or greater. Defender® Narrow Stainless Steel Spikes have 9 snap points along the base. These make it possible to make the strip smaller without extra tools. Making it adjustable means the bird prevention spike will fit perfectly on any size ledge or roosting site.
High Quality Stainless Steel Bird Spikes
The Defender® Narrow Stainless Steel Bird Prevention Spikes are made from 304 Grade steel wires which protrude from a super tough UV Stabilised Polycarbonate base. This hard-wearing bird spike will triumph in all weather conditions and comes with a 25 Year "No Rust” Warranty when installed in the UK. Some lower-quality spikes available on the market can rust in a matter of years or even months - but these superior Defender® Narrow Stainless Steel Bird Spikes will protect your for years to come.
Made in the UK
All Defender® Bird and Pigeon Spikes are made in the UK. David and Kursty Jones are the owners of Jones and Son Pest Control Supplies Ltd. They are the proud inventors of the bird prevention spike, which they designed and produce. Customer care and providing a reliable, quality bird prevention product is their greatest priority.
For full terms and conditions of the Defender® Bird Spikes UK Warranty please see our Warranty Information Page.
Order by 3 pm (Monday - Friday) for same-day despatch.
1st Class Royal Mail (1-3 Working Days) - £4.92
UPS (Trackable Courier Service) - £14.40
Orders outside of the UK Mainland – Please call us for a shipping quote.
We manufacture all our products in Devon, UK and hold vast amounts of stock. If you need a large order, we can ship it on the same working day. If you have any questions about delivery, please call us on 01626 835055 and we will be happy to help.